<?xml version="1.0" encoding="gb2312"?>
<rss version="2.0">
<channel>
<title>Linux入门</title>
<link>/Linux/rm/</link>
<description>Linux频道 / Linux入门</description>
<language>zh-cn</language>
<generator>Copyright &amp;copy; 2008 Www.ofAdmin.Com online Services</generator>
<webmaster>zhvy@vip.qq.com</webmaster>
<item>
    <title>linux菜鸟变高手-备份Linux内核的步骤</title>
    <link>/Linux/rm/201004/14-11315.html</link>
    <description>　　随着我学习Suse的深入，我面临的问题也是越来越多，Suse编译内核都快让我痛疼了，要是上次成功编译SLED 10.0的内核，今天编译Suse 10.2内核直接导致我的Suse面临重装，要是备份Linux内核就好了，备份Linux内核相当的简单，下面就是步骤，英文也很简单，相信准备对内核有</description>
    <pubDate>2010-04-14</pubDate>
    <category>Linux入门</category>
    <author>佚名</author>
    <comments>华夏网管站</comments>
</item>
<item>
    <title>Linux课堂：linux下正常关机之命令详解</title>
    <link>/Linux/rm/201003/16-10993.html</link>
    <description>　　这里给大家介绍判断linux下正常关机的问题。小编搜集了些资料供大家查看，希望大家从中能获得帮助。
　　系统启动的时候生成一个文件，linux正常关机的时候会删除这个文件。网管员们则可以根据系统开机时有没有那个文件来判断是不是非正常关机，减少网络管理过程中出现</description>
    <pubDate>2010-03-16</pubDate>
    <category>Linux入门</category>
    <author>佚名</author>
    <comments>华夏网管站</comments>
</item>
<item>
    <title>常用Linux路由命令</title>
    <link>/Linux/rm/201003/10-10922.html</link>
    <description>第一组命令： ifconfig, ifup, ifdown
1) ifconfig
作用：手动启动、观察与修改网络接口的相关参数，包括IP地址以及MTU大小等。
例1.1：暂时修改IP地址
# ifconfig eth0 192.168.100.100
例1.2：修改IP地址、掩码和MTU
# ifconfig eth0 192.168.100.100 netmask 255.25</description>
    <pubDate>2010-03-10</pubDate>
    <category>Linux入门</category>
    <author>佚名</author>
    <comments>华夏网管站</comments>
</item>
<item>
    <title>Linux 系统疑难解答之98式(八)</title>
    <link>/Linux/rm/200812/09-4326.html</link>
    <description>　　93.如何使用Linux架设News？
　　
　　在安装Linux时，选择INN软件包，并允许开机时启动innd。在完成系统的安装时，大部分配置工作已经完成，无需编译源码。
　　
　　1）配置/etc/news/inn.conf：
　　
　　domain: foo.com
　　organization: foo company news site
　</description>
    <pubDate>2008-12-09</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>Linux 系统疑难解答之98式(七)</title>
    <link>/Linux/rm/200812/09-4325.html</link>
    <description>　　84.如何运行计划任务？
　　
　　大大可能对中的计划任务都比较熟悉了，它可以通过一些简单的设置，定时完成一些任务。在Linux系统的维护中，我们可以也会需要定期执行一些任务，这种情况可以使用：
　　
　　1） at命令：它可以键盘或文件中读取指令，然后在指定时间完</description>
    <pubDate>2008-12-09</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>Linux 系统疑难解答之98式(六)</title>
    <link>/Linux/rm/200812/09-4324.html</link>
    <description>　　70.如何检查Linux硬盘使用情况？
　　
　　在Linux环境下，你可以使用df命令来查看硬盘的使用情况。下面就是一个df CT Ch(-T参数：显示文件系统类型，-h参数用可读性较高的方式来显示信息)命令的输入实例：
　　
　　Filesystem Type Size Used Avail Use% Mountedon
　</description>
    <pubDate>2008-12-09</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>Linux 系统疑难解答之98式(五)</title>
    <link>/Linux/rm/200812/09-4323.html</link>
    <description>　　四、 Linux下的&amp;ldquo;神兵利器&amp;rdquo;：15问
　　
　　55.KDE是什么，有什么特点？
　　
　　KDE项目在1996年10月发起的，其目的是在X-Window上建立一个完整易用的桌面环境。KDE现在除了拥有KFM(类似于IE4.0)、KPresenter(类似PowerPoint)、KIllustrator(类似CorelDraw</description>
    <pubDate>2008-12-09</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>Linux 系统疑难解答之98式(四)</title>
    <link>/Linux/rm/200812/09-4322.html</link>
    <description>　　43.如果通过Modem拔号上网？
　　
　　1） 执行命令ln /dev/modem /dev/cau1（根据实际情况）
　　2） 创建一个脚本：touch sw，加入：
　　
　　/usr/sbin/pppd connect &amp;prime;/usr/sbin/chat &amp;Prime; &amp;Prime; ATDT163 CONNECT &amp;Prime; &amp;Prime;
　　ogin:username
　　</description>
    <pubDate>2008-12-09</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>Linux 系统疑难解答之98式(三)</title>
    <link>/Linux/rm/200812/09-4321.html</link>
    <description>　　28.Linux下的目录操作与DOS/有什么不同？
　　
　　Linux的文件系统与DOS类似，也是采用树形结构的。但目录的表示有一点是完全不同的，Linux用&amp;ldquo;/&amp;rdquo;表示根目录，而DOS用&amp;ldquo;&amp;rdquo;表示根目录。以下是在Linux下常用的目录操作命令：
　　1）&amp;ldquo;mkdir 目</description>
    <pubDate>2008-12-09</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>Linux 系统疑难解答之98式(二)</title>
    <link>/Linux/rm/200812/09-4320.html</link>
    <description>　　二、 Linux大观：7问
　　
　　13.RedHat Linux 6.5和Linux 2.4哪个版本高？
　　
　　最近许多报刊、网站都介绍了Linux的最新版 2.4怎样，怎样？而许多Linux初学者正在使用的是RedHat Linux 6.5版。哪个版本更高？
　　
　　其实，这两个版本号是不同的！RedHat Linux是</description>
    <pubDate>2008-12-09</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>Linux 系统疑难解答之98式(一)</title>
    <link>/Linux/rm/200812/09-4319.html</link>
    <description>　　一、 直击Linux：12问
　　
　　1.什么是Linux？
　　
　　Linux是一个诞生于网络、成长于网络且成熟于网络的奇特的操作系统。1991年，芬兰大学生Linus Torvalds萌发了开发一个自由的UNIX操作系统的想法，当年，Linux就诞生了，为了不让这个羽毛未丰的操作系统矢折，Linu</description>
    <pubDate>2008-12-09</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>Linux下Informix数据库简明安装指南</title>
    <link>/Linux/rm/200812/09-4317.html</link>
    <description>　　本文采用的版本是Informix Dynamic Server 2000。Informix与等数据库相比，速度并不占优，但可靠性非常好。下面我们一起来看看Informix数据库在Linux环境下的安装过程。
　　
　　第一步：获取数据库安装程序。 在www.Linuxbyte.net的软件中心Informix Dynamic Server 20</description>
    <pubDate>2008-12-09</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>Linux下proftpd的安装配置与管理方法</title>
    <link>/Linux/rm/200812/09-4316.html</link>
    <description>　　一. proftpd 简介
　　
　　proftpd是一款开放源码的ftp软件，它是原来世界范围使用最广泛的wu-ftpd的改进版，它修正了wu-ftpd的许多缺陷，在许多方面进行了重大的改进，其中一个重要变化就是它学习了Apache 的配置方式，使proftpd的配置和管理更加简单易懂。本文将介绍</description>
    <pubDate>2008-12-09</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>用kickstart远程安装Linux系统</title>
    <link>/Linux/rm/200812/09-4315.html</link>
    <description>&amp;nbsp;&amp;nbsp;&amp;nbsp; 前言：原有系统是RH Linux 9.0，现想把它远程安装成RH AS3，安装过程中不需要任何交互式操作。使用kickstart结合WEB和DHCP可以做到这一点。kickstart的原理大概这样：使用要安装的内核镜像引导后，内核会读取指定位置的ks配置文件（ks.cfg），在安装过程</description>
    <pubDate>2008-12-09</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>用WinGrub 引导Linux 简述</title>
    <link>/Linux/rm/200812/09-4314.html</link>
    <description>&amp;nbsp;&amp;nbsp; 一、开篇叙述我第一次安装Linux和接下来的经历(遭遇)
&amp;nbsp;&amp;nbsp;&amp;nbsp; 开篇：按照北南兄弟的《FC4菜鸟图文版安装教程》我顺利地以本地SATA硬盘方式安装了FC4. 当时按照建议我把FC4的Linux版本GRUB程序装在了MBR（Main Boot Record主引导记录）里面。
&amp;nbsp</description>
    <pubDate>2008-12-09</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>Linux下的软件包安装方法</title>
    <link>/Linux/rm/200812/09-4313.html</link>
    <description>　　1、已经编译打包好的xxx.rpm
　　
　　如果你的Linux系统带有安装程序，最好用系统自带的安装程序来安装。比如SuSE的YaST2就带有安装程序，在KDE环境下只要是rpm，就可以在Konqueror里面点击再&amp;ldquo;Install with YaST2&amp;rdquo;，这样做的好处是YaST2会给你提示包的详细</description>
    <pubDate>2008-12-09</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>Linux下软件发布技巧</title>
    <link>/Linux/rm/200812/09-4312.html</link>
    <description>　　Linux现在能够被越来越多的人认识及使用，在很大程度上可以归结为其具有强大的C编译器&amp;mdash;&amp;mdash;gcc、便于交流的环境&amp;mdash;&amp;mdash;Internet，以及雄厚的师资&amp;mdash;&amp;mdash;有数不清的程序员在开发数不清的代码。
　　
　　有了Linux和Internet，我们可以很容易地在</description>
    <pubDate>2008-12-09</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>Linux下安装WINE支持汉字教程</title>
    <link>/Linux/rm/200812/09-4311.html</link>
    <description>　　因为我们学校的校园网是通过在本机运行一个客户端来上网的,所以我在下上网必须使这个软件能够运行,才能上咱sir,于是我就想着怎么来安装一个最新版的wine来让它支持汉字.
　　
　　下面是我的安装步骤:
　　
　　安装前的准备
　　
　　把原先的wine卸载掉.rh7.3有wine和w</description>
    <pubDate>2008-12-09</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>linux下如何装RPM包管理工具</title>
    <link>/Linux/rm/200812/09-4310.html</link>
    <description>　　一、安装
　　
　　命令格式：
　　
　　rpm -i ( or --install) options file1.rpm ... fileN.rpm
　　
　　参数：
　　
　　file1.rpm ... fileN.rpm 将要安装的RPM包的文件名
　　
　　详细选项：
　　
　　-h (or --hash) 安装时输出hash记号 (``#'')
　　--test 只</description>
    <pubDate>2008-12-09</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>在硬盘上用ISO装Mandrake9</title>
    <link>/Linux/rm/200812/09-4309.html</link>
    <description>　　对于硬盘安装 的文章已经有了很多，一般的方法都是先把三个iso&amp;gt;;文件解压到硬盘的某个目录上面，然后再通过DOS启动，用loadin,exe引导或者或者用软盘启动。但到目前为止，我还没有见到用ISO裸装Mandrake9的方法。现在介绍下的我安装过程的情况。由于Mandrake90刚出来</description>
    <pubDate>2008-12-09</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>RedHat 9.0中mrtg安装详解</title>
    <link>/Linux/rm/200812/08-4297.html</link>
    <description>　　对于Mrtg就不多说了，在网上很容易就找到其各方面的详细资料，也可以上http://www.mrtg.org 查看官方文档。下面我就说说我的安装过程：
　　
　　在安装过程中用到的软件：
　　libpng-1.2.8.tar.gz2
　　zlib-1.2.3.tar.gz
　　jpegsrc.v6b.tar.gz
　　freetype-2.1.10.</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>共创Linux co-create 2005系统安装图解四 </title>
    <link>/Linux/rm/200812/08-4296.html</link>
    <description>　
　　这些与XP较为相似。打开设备管理器看一下设备驱动是否安装完成。
　　 　
　　各种设备都安装了驱动程序了，网卡有驱动就可建宽带连接了。
　　
　　共创Linux co-create 2005篇：（八）网络设置 四、建立宽带连接
　　
　　在控制面板中有&amp;ldquo;网络连接&amp;rdquo;选项</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>共创Linux co-create 2005系统安装图解三</title>
    <link>/Linux/rm/200812/08-4295.html</link>
    <description>　
　　安装完成了，系统管理员帐户为root默认没有密码。取出光盘后点&amp;ldquo;下一步&amp;rdquo;按钮重新启动。
　　 　
　　共创Linux co-create 2005篇：（六）系统启动Ⅰ二、共创桌面Linux 2005系统启动
　　
　　启动时首先出现启动选单，如下图所示。
　　 　
　　如不进行选</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>共创Linux co-create 2005系统安装图解二</title>
    <link>/Linux/rm/200812/08-4294.html</link>
    <description>　
　　点击&amp;ldquo;swap&amp;rdquo;选中它，显示如下图。
　　 　
　　点击&amp;ldquo;确定&amp;rdquo;按钮。
　　 　
　　在上图可见，ext3和swap文件系统都有了，并将被格式化，分区选择操作完成。另外还有一个选项&amp;ldquo;不把引导程序安装在硬盘主引导记录上&amp;rdquo;。建议不选择它，而</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>共创Linux co-create 2005系统安装图解一</title>
    <link>/Linux/rm/200812/08-4293.html</link>
    <description>　　共创Linux co-create 2005篇：（一）安装过程Ⅰ 北京共创开源软件有限公司在2004年10月25日发布Co-CreateLinux2005版操作系统，这一版本是Co-CreateLinux 1.0.3的后继版本，它是一个全新的版本。
　　
　　共创桌面Linux 2005（ISO镜像文件）地址：
　　
　　ftp://ftp.o</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>mp3 ID3v1中文乱码完美解决方法</title>
    <link>/Linux/rm/200812/08-4292.html</link>
    <description>　　首先，确定你的系统内码是中文编码，如GB2312，GBK。如果不清楚，请在终端下输入locale查看，不是就修改。这里，我提供在Suse下的修改方法：启动Yast2控制中心，打开&amp;ldquo;系统&amp;rdquo;&amp;mdash;&amp;mdash;&amp;gt;&amp;ldquo;/etc/sysconfig编辑器&amp;rdquo;，展开&amp;ldquo;System Environ</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>Linux下的压片转换工具mencoder应用</title>
    <link>/Linux/rm/200812/08-4291.html</link>
    <description>　　首先，确定你的系统内码是中文编码，如GB2312，GBK。如果不清楚，请在终端下输入locale查看，不是就修改。这里，我提供在Suse下的修改方法：启动Yast2控制中心，打开&amp;ldquo;系统&amp;rdquo;&amp;mdash;&amp;mdash;&amp;gt;&amp;ldquo;/etc/sysconfig编辑器&amp;rdquo;，展开&amp;ldquo;System Environ</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>在Linux中添加和删除程序(图)</title>
    <link>/Linux/rm/200812/08-4290.html</link>
    <description>　　在Linux中要添加和删除程序是一件相当麻烦的事情，软件的安装可以用千奇百怪来形容，除了最简单的双击rpm包来安装软件外，还有通过make、configure命令来安装的,也有通过将软件直接copy到指定目录来安装的。除了rpm包的安装方法最简单外，其余的方法都很难被用户掌握，不</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>组图：安装redhat9.0全解 二</title>
    <link>/Linux/rm/200812/08-4289.html</link>
    <description>　　第十四步
　　
　　网络配置******如图14所示********，这个根据自己的网络情况进行相应配置。如果对网络不是很了解。可以直接单击下一步跳过。
　　 　
　　图14
　　
　　第十五步
　　
　　配置*******如图15所示******。Red Hat提供了三种级别的配置，可以根据自己的</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>组图：安装redhat9.0全解 一</title>
    <link>/Linux/rm/200812/08-4288.html</link>
    <description>　　前面说了那么多关于Linux的优点，朋友们对Linux一定是跃跃欲试，那么跟我来，通过这二十五步操作，在我们的机器上安装好Linux。闲话少说，现在就开始！
　　
　　在开始安装Linux之前，请首先收集一下相关硬件信息。如果不能确定系统对硬件的兼容性可以到http://hardware</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>红旗Linux桌面4.1文本安装过程图解(四)</title>
    <link>/Linux/rm/200812/08-4287.html</link>
    <description>　　选择显示器分辨率。如果系统不认的显示器分辨率最好选800x600，否则按正常选。选择完成后按&amp;ldquo;Tab&amp;rdquo;键选择&amp;ldquo;确定&amp;rdquo;再按回车键后，出现如下图42所示画面。
　　 　
　　图42
　　
　　选择显示器刷新频率。如果系统不认的显示器刷新频率最好选最小值，</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>红旗Linux桌面4.1文本安装过程图解(三)</title>
    <link>/Linux/rm/200812/08-4286.html</link>
    <description>　　安装已经全部完成，取出安装光盘后，按回车键后安装程序将重新启动计算机，重新启动后，首先出现启动菜单如下图32所示。
　　 　
　　图32
　　
　　第一项是正常启动模式，第二项是启动模式(以最少驱动)，第三项是控制台启动模式。如果曾经用图形方式安装失败，这里最好</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>红旗Linux桌面4.1文本安装过程图解(二)</title>
    <link>/Linux/rm/200812/08-4285.html</link>
    <description>　　网络配置∶如果你已知IP地址、子网掩码、默认网关、DNS地址等信息，即应手动进行配置，如果以上信息还不了解可使用&amp;ldquo;使用 DHCP 进行配置&amp;rdquo;。
　　
　　黄色光标在&amp;ldquo;使用 DHCP 进行配置&amp;rdquo;前的括号内时，按空格键取消括号内的&amp;ldquo;*&amp;rdquo;号，这时I</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>红旗Linux桌面4.1文本安装过程图解(一)</title>
    <link>/Linux/rm/200812/08-4284.html</link>
    <description>　　很多用810或815集成显卡或者其它红旗Linux桌面4.1正式版不支持的显卡、显示器的用户，在取用图形界面方式安装过程或安装后进入系统时会出现花屏现象，使安装过程无法继续。为此可用文本方式安装试一试，并在第一次重启时，选择控制台形式进入系统配置显卡、显示器、</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>Linux系统学习方向和方法浅谈</title>
    <link>/Linux/rm/200812/08-4282.html</link>
    <description>　　由于笔者是做Linux培训的，所以对于初学Linux系统的朋友接触的比较多，对于初学Linux时遇到的问题了解的也够深刻，以下言论有不周到的地方望朋友们指出:
　　
　　首先说明希望学Linux的朋友能够忘记2000，最起码忘记下的盘符、应用程序等基础的东西，其次要深刻明白Linu</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>Linux下添加硬盘分区格式化详解</title>
    <link>/Linux/rm/200812/08-4281.html</link>
    <description>预备知识
&amp;nbsp;
在我们添加硬盘前，首先要了解linux系统下对硬盘和分区的命名方法。
&amp;nbsp;
在Linux下对IDE的设备是以hd命名的，第一个ide设备是hda，第二个是hdb。依此类推
&amp;nbsp;
我们一般主板上有两个IDE接口，一共可以安装四个IDE设备。主IDE上的两个设备分别对应</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>引导加载程序之争：了解 LILO 和 GRUB</title>
    <link>/Linux/rm/200812/08-4280.html</link>
    <description>从普通的桌面用户到 Linux&amp;reg; 系统管理员，大部分 Linux 用户都使用过一种名为引导加载程序的工具。此类工具的不同变种会提供不同层次的支持和功能。在很多情况下，Linux 发行版默认安装的引导加载程序并不总是适合需要；每个引导加载程序的默认设置也是如此。在本文中</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>共创linux2005版 装完系统还要装编译器</title>
    <link>/Linux/rm/200812/08-4279.html</link>
    <description>　　下个down（断点续传的工具，）为了方便在下文件，总不能下一半一半的文件吧！，文件名： linuxdown-1.2.0.tar.gz
　　
　　下完 打开 图形方式不说了，在终端执行 #tar -xzvf linuxdown-1.2.0.tar.gz
　　
　　是源文件装不了，好象没有编译器什么的cc..（装系统时也没提</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>Solaris10安装配置过程</title>
    <link>/Linux/rm/200812/08-4278.html</link>
    <description>基本配置：

1 1400x1050分辨率的设置我的笔记本分辨率是1400x1050的，而Solaris 10起来后默认使用的是1280x1024的，看起来有点模糊。查了一些文档，知道需要新建一个文件/etc/X11/xorg.conf。这是我的/etc/X11/xorg.conf的内容。 
注意，我加入了Section &quot;ServerFl</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>FreeBSD与Linux的比较</title>
    <link>/Linux/rm/200812/08-4277.html</link>
    <description>　　FreeBSD是一个自由的，源自AT&amp;amp;T UNIX的操作系统。目前已经不包含任何AT&amp;amp;T的代码。可以说它是正统的UNIX后代。而Linux是由一个芬兰Helsinki大学的学生Linus Torvalds开发的UNIX的克隆。在Linus上大学的时候，由于AT&amp;amp;T与加州大学伯克莱分校在BSD版权问题上发生</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>Linux 防火墙入门-基本观念</title>
    <link>/Linux/rm/200812/08-4276.html</link>
    <description>　以下介绍入门时，所需要的一些基本观念。
　　TCP/IP
　　Figure 2. TCP/IP 四层架构
　　　 
　　封包过滤
　　所谓封包过滤，是一种小软件，它藉以检查 IP 封包的表头，来决定该封包的命运(接受/转向/丢弃/拒绝)。在 Linux 中，封包过滤的功能，已整合进入 Linux 核心(ke</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>GRUB安装配置及使用汇总</title>
    <link>/Linux/rm/200812/08-4275.html</link>
    <description>(一)安装linux时安装grub.

安装redhat linux时会提示安装引导程序,如果选择grub为引</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>RedHat 7.3 字型安装</title>
    <link>/Linux/rm/200812/08-4274.html</link>
    <description>　　一、版权说明 
　　
　　本文版权属于全体作者所有，且以 GNU FDL 授权合约发布。在遵守 GNU 
　　FDL 授权合约的情况下，您可以复制、散布，以及修改本文件。唯请保持 
　　作者列表的完整，若您修改过此份文件，也请在作者列表中加入您的大名。 
　　
　　同时请注意本</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>Linux 防火墙简介</title>
    <link>/Linux/rm/200812/08-4273.html</link>
    <description>　　前言
　　一旦连上网络，就充满各种危机。
　　许多人基于各式各样的理由，想侵入你的系统，这种人俗称为 cracker。尤有甚者，近年来，cracker 圈里流行一种结合病毒行为及系统漏洞的入侵工具，称为网虫(Netwrom)，它以类似网络机器人(robot)的模式，到处扫射咬噬，已形</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>RedHat Linux 新手入门教程 (5) </title>
    <link>/Linux/rm/200812/08-4272.html</link>
    <description>　　第5章：网络应用 
　　
　　5.1 常用网络命令 
　　在Red Hat Linux 7.1系统提供了与网络相关的工具，掌握好这些工具是十分必要的： 
　　第一类：设置工具 
　　1.netconf： 
　　netconf是Red Hat Linux提供的Linuxconf的一部分，主要用于设置与网络相关的参数。它可以</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>RedHat Linux 新手入门教程 (4)</title>
    <link>/Linux/rm/200812/08-4271.html</link>
    <description>　　第4章 X 
　　
　　4.1 X 简介 
　　要想成为一套优秀的操作系统，除了性能稳定、功能齐全之外，还应该拥有一个友好的操作系统，否则只会呆在研究室里，难以普及。 
　　在UNIX系统下，大多都是采用X Window做为图形界面的。1984年，麻省理工学院与DEC制定了Athena计划，</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>RedHat Linux 新手入门教程 (3) </title>
    <link>/Linux/rm/200812/08-4270.html</link>
    <description>　 第3章：Red Hat Linux 7.1使用基础 
　　3.1 登录和退出系统 
　　
　　1. 启动系统 
　　通常LILO是安装在MBR上的，计算机启动后，MBR上的程序被执行，将出现一个不是很漂亮的图形：左边是一个小红帽图像，右边列出了可以启动的操作系统，你可以使用键盘箭头切换。刚安装</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>Red Hat Linux 新手入门教程 (2)</title>
    <link>/Linux/rm/200812/08-4269.html</link>
    <description>　&amp;nbsp;&amp;nbsp; 第2章：安装指南 
　　
　　2.1 安装前的准备 
　　1、收集系统资料：为了能够顺利安装和设置Linux系统，你必须将以下资料记录在案，以备系统安装时使用： 
　　硬盘：数量, 容量和类型； 
　　内存：您的计算机所装内存的数量； 
　　CD-ROM：接口类型(IDE,</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>
<item>
    <title>RedHat Linux 新手入门教程 (1)</title>
    <link>/Linux/rm/200812/08-4268.html</link>
    <description>　　1994年，Young和Mark Ewing创建了Red Hat公司，并创造了全球使用最广泛的Red Hat Linux套件，为Linux的普及立下了汗马功劳，笔者也是跟随着Red Hat的带领下走进Linux世界的。Red Hat取得了辉煌的成绩，甚至许多Linux发行公司还采用了许多Red Hat Linux的代码，如Mandrake</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>秩名</author>
    <comments>华夏网管站</comments>
</item>
<item>
    <title>如何让原来跑DOS的机器也同时跑Linux</title>
    <link>/Linux/rm/200812/08-4267.html</link>
    <description>　　假如您想把Linux装在原来属於DOS的机器里, 您第一件事就要确定
　　DOS是否占用您硬碟的全部, 假如是的话(大部分情况正是如此), 您就
　　就必须重新分割硬碟。
　　
　　 与硬碟相关的一个名词非常重要, 本书从头到尾几乎都有用到这观
　　念 -- 分割区 (Partition)。</description>
    <pubDate>2008-12-08</pubDate>
    <category>Linux入门</category>
    <author>华夏网管站整理</author>
    <comments>互联网</comments>
</item>

</channel>
</rss>

